Code: 515
Description: Tandem rear fence motor error
One of the conditions is detected:
• The return sensor does not switch on within 10 sec. after the rear fence motor switches on.
• The HP sensor does not switch on 10 sec. after the rear fence motor switches on.
• The HP sensor and return sensor switch on at the same time.
One of the conditions is detected:
• The return sensor does not switch on within 10 sec. after the rear fence motor switches on.
• The HP sensor does not switch on 10 sec. after the rear fence motor switches on.
• The HP sensor and return sensor switch on at the same time.
Causes: • Rear fence motor defective or poor connection
• Paper or other obstacle interfering with operation of the sensors
• Paper or other obstacle trapped between tray and motor
• Motor mechanical overload due to obstruction
• Return sensor or HP sensor defective or dirty Note (B246)
• This problem will not issue the SC code on the operation panel.
• The machine will prompt the operator to reset tray by opening and closing it.
• If the problem persists, the machine will display again and the tray cannot be used.
• Paper or other obstacle interfering with operation of the sensors
• Paper or other obstacle trapped between tray and motor
• Motor mechanical overload due to obstruction
• Return sensor or HP sensor defective or dirty Note (B246)
• This problem will not issue the SC code on the operation panel.
• The machine will prompt the operator to reset tray by opening and closing it.
• If the problem persists, the machine will display again and the tray cannot be used.