Code: 730
Description: Finisher stapler movement motor error B140
The stapler HP sensor does activate within the prescribed time after the stapler motor turns on and moves the stapler away from home position. After 2 counts, the SC is logged as a jam.
The stapler HP sensor does activate within the prescribed time after the stapler motor turns on and moves the stapler away from home position. After 2 counts, the SC is logged as a jam.
Causes: • Stapler HP sensor defective
• Sensor harness disconnected, defective
• Stapler movement motor defective
• Finisher main board defective
• Stapler movement motor overload
• Sensor harness disconnected, defective
• Stapler movement motor defective
• Finisher main board defective
• Stapler movement motor overload