Code: 733
Description: Finisher lower tray lift motor error
After the lift motor switches on to lift the tray, paper height sensor 2 does not detect the top of the paper stack, or after the motor reverses to lower the stack the top of the stack remains detected (the status of paper height sensor 1 does not change). After 2 counts, the SC is logged as a jam.
After the lift motor switches on to lift the tray, paper height sensor 2 does not detect the top of the paper stack, or after the motor reverses to lower the stack the top of the stack remains detected (the status of paper height sensor 1 does not change). After 2 counts, the SC is logged as a jam.
Causes: • Paper height sensor 1 or 2 defective
• Sensor harness disconnected, defective
• Tray lift motor defective
• Finisher main board defective
• Tray lift motor overload
• Sensor harness disconnected, defective
• Tray lift motor defective
• Finisher main board defective
• Tray lift motor overload