Description: SBU auto gain error The white level cannot be adjusted to the first target level within the target during auto gain control.
Causes: • SBU board defective • SIOB board defective • IPU board defective • BCU board defective • Scanner motor defective • Exposure lamp defective • Exposure lamp stabilizer defective • Harness between exposure lamp and lamp stabilizer is disconnected • Harness between lamp stabilizer – SIOB is disconnected • Harness between SBU - SIOB is disconnected • Harness between SIOB - BCU is disconnected • Harness between SBU – IPU is disconnected • Harness between IPU - BCU is disconnected • White plate is installed incorrectly or is dirty • Scanning mirrors of the exposure unit are dirty or out of position