Code: 515
Description: Tandem rear fence motor error
One of the conditions is detected: • The return sensor does not switch on within 10 s. after the rear fence motor switches on. • The HP sensor does not switch on 10 s. after the rear fence motor switches on. • The HP sensor and return sensor switch on at the same time.
One of the conditions is detected: • The return sensor does not switch on within 10 s. after the rear fence motor switches on. • The HP sensor does not switch on 10 s. after the rear fence motor switches on. • The HP sensor and return sensor switch on at the same time.
Causes: • Rear fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors • Paper or other obstacle trapped between tray and motor • Motor mechanical overload due to obstruction • Return sensor or HP sensor defective or dirty Note • This problem will not issue the SC code on the operation panel. • The machine will prompt the operator to reset tray by opening and closing it. • If the problem persists, the machine will display again and the tray cannot be used.
Remedy: