Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 72 — Brother DCP9040CN

Code: 72

Description: Beam detecting sensor (K) failure
Causes: 1 Laser unit harness connection failure. 2 Laser unit failure. 3 Engine PCB failure.
Remedy: 1 Laser unit harness connection failure Check the two harness connections of the laser unit and reconnect them. 2 Laser unit failure Replace the laser unit. 3 Engine PCB failure Replace the engine PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9040CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie