Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 85 — Brother DCP9040CN

Code: 85

Description: Tray 1 (T1) is not installed into the machine.
Causes: 1 T1 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB ASSY. 3 Engine PCB failure.
Remedy: 1 T1 PE/edge sensor PCB failure Check the sensor performance following the procedure described in “Maintenance mode 32”. If any problem occurs, replace the T1 PE/edge sensor PCB ASSY. 2 Harness connection failure of T1 PE/edge sensor PCB ASSY Check the harness connection of the T1 PE/edge sensor PCB ASSY and reconnect it. 3 Engine PCB failure Replace the engine PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9040CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie