Code: 9D
Description: Incorrect sensor measurement value when implementing auto color registration from the control panel
Causes: 1 Invisible damage on belt unit. 2 Harness connection failure of registration-mark sensor PCB ASSY. 3 Registration-mark sensor PCB failure. 4 Transfer HVPS PCB unit failure. 5 Engine PCB failure.
Remedy: 1 Invisible damage on belt unit Check the registration mark sensor performance following the procedure described in “Maintenance mode 75”. If any problem occurs, replace the belt unit. 2 Harness connection failure of registration-mark sensor PCB ASSY Check the harness connection of the registrationmark sensor PCB ASSY and reconnect it. 3 Registration-mark sensor PCB failure Replace the registration-mark sensor PCB ASSY. 4 Transfer HVPS PCB unit failure Replace the transfer HVPS PCB unit. 5 Engine PCB failure Replace the engine PCB ASSY.