Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB — Brother DCP9040CN

Code: CB

Description: Belt unit is not installed into the machine.
Causes: 1 Harness connection failure of density sensor holder ASSY. 2 Density sensor failure. 3 Transfer HVPS PCB unit failure. 4 Engine PCB failure.
Remedy: 1 Harness connection failure of density sensor holder ASSY Check the harness connection of the density sensor holder ASSY and reconnect it. 2 Density sensor failure Replace the density sensor holder ASSY. 3 Transfer HVPS PCB unit failure Replace the transfer HVPS PCB unit. 4 Engine PCB failure Replace the engine PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9040CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie