Code: SC428
Description: Drum Potential Sensor Error 3: Vh Adjustment Error
The correct value for Vh (standard drum potential for halftones) could not be detected after 45 consecutive adjustments of LD power: • The value for SP3904 001 could not be attained for normal speed, or the value of SP3904 002 could not be attained for low speed mode. • The LD power adjustments exceeded the upper and lower limits (+185 and –70).
The correct value for Vh (standard drum potential for halftones) could not be detected after 45 consecutive adjustments of LD power: • The value for SP3904 001 could not be attained for normal speed, or the value of SP3904 002 could not be attained for low speed mode. • The LD power adjustments exceeded the upper and lower limits (+185 and –70).
Causes: • Drum potential sensor harness, connector is loose, broken, defective
• Drum potential sensor dirty
• Drum potential sensor defective
• Drum unit connector, harness loose, broken, defective
• Poor drum ground connection
• LD unit defective
• BCU defective
• Drum potential sensor dirty
• Drum potential sensor defective
• Drum unit connector, harness loose, broken, defective
• Poor drum ground connection
• LD unit defective
• BCU defective