Code: SC542
Description: Fusing Temperature Warm-up Error
One of the following occurred:
• B234/B235: Hot roller did not reach target operation temperature within 360 sec. after the machine was powered or 360 sec. minutes after the doors were closed.
• B236: Hot roller did not reach target operation temperature within 465 sec. after the machine was powered or 465 sec. minutes after the doors were closed.
• Fusing temperature rose only 5C toward the fusing temperature within 20 s after the machine was powered on, or after the doors were closed.
• Fusing temperature rose only 5C toward the fusing temperature within 20 s after thermistor started monitoring hot roller temperature. (The thermistors starts monitoring 25 s after the hot roller starts rotating.)
One of the following occurred:
• B234/B235: Hot roller did not reach target operation temperature within 360 sec. after the machine was powered or 360 sec. minutes after the doors were closed.
• B236: Hot roller did not reach target operation temperature within 465 sec. after the machine was powered or 465 sec. minutes after the doors were closed.
• Fusing temperature rose only 5C toward the fusing temperature within 20 s after the machine was powered on, or after the doors were closed.
• Fusing temperature rose only 5C toward the fusing temperature within 20 s after thermistor started monitoring hot roller temperature. (The thermistors starts monitoring 25 s after the hot roller starts rotating.)
Causes: • Fusing lamp(s) disconnected
• Thermistor out of position
• Thermistor out of position