Code: 85
Description: Tray 1 (T1) is not installed into the machine.
Causes: 1 T1 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB ASSY. 3 Engine PCB failure.
Remedy: 1 T1 PE/edge sensor PCB failure Check the sensor performance following the procedure described in “Maintenance mode 32”. If any problem occurs, replace the T1 PE/edge sensor PCB ASSY. 2 Harness connection failure of T1 PE/edge sensor PCB ASSY Check the harness connection of the T1 PE/edge sensor PCB ASSY and reconnect it. 3 Engine PCB failure Replace the engine PCB ASSY.