Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 9D — Brother DCP9042CDN

Code: 9D

Description: Incorrect sensor measurement value when implementing auto color registration from the control panel
Causes: 1 Invisible damage on belt unit. 2 Harness connection failure of registration-mark sensor PCB ASSY. 3 Registration-mark sensor PCB failure. 4 Transfer HVPS PCB unit failure. 5 Engine PCB failure.
Remedy: 1 Invisible damage on belt unit Check the registration mark sensor performance following the procedure described in “Maintenance mode 75”. If any problem occurs, replace the belt unit. 2 Harness connection failure of registration-mark sensor PCB ASSY Check the harness connection of the registrationmark sensor PCB ASSY and reconnect it. 3 Registration-mark sensor PCB failure Replace the registration-mark sensor PCB ASSY. 4 Transfer HVPS PCB unit failure Replace the transfer HVPS PCB unit. 5 Engine PCB failure Replace the engine PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9042CDN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie