Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 740 — Ricoh Aficio MPC2000

Code: 740

Description: Finisher corner stapler motor error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For 1000-sheet (booklet) finisher. The stapler motor does not switch off within the prescribed time after operating. The HP sensor of the staple unit does not detect the home position after the staple unit moves to its home position. The HP sensor of the staple unit detects the home position after the staple unit moves from its home position. For 500-sheet finisher. The stapler HP sensor does not detect "ON"/"OFF" signal even the stapler moves from the "OFF"/"ON" position for 0.6 seconds. The stapler HP sensor does not detect "ON" when a stapling job is commanded or the stapler moves.
Causes: Staple jam. Motor overload. Defective stapler motor.
Remedy: 1. Check the connections and cables for the components mentioned above. 2. Replace the HP sensor and/or stapler motor 3. Replace the finisher main board.

← Xem tất cả mã lỗi Ricoh Aficio MPC2000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie