Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC220-04 — Ricoh Aficio MPC2003

Code: SC220-04

Description: Leading Edge: LD1 synchronization detection error: Ye The leading edge LD0 synchronization detection signal of the corresponding color was not output within T1 sec. while the polygon mirror motor was operating at normal speed.
Causes: • The interface harness to the synchronization detection unit damaged or not connected correctly. • Synchronization detection board defective • Beam does not enter photo detector. • Abnormality around GAVD • IDB (LED driver) defective • LDB defective • BCU defective
Remedy: • Turn the power off/on • Replace the LSU or polygon motor • Replace the polygon harness • Replace the IPU board

← Xem tất cả mã lỗi Ricoh Aficio MPC2003

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie