Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 82 — Brother DCP9045CDN

Code: 82

Description: Density patch measurement is not completed normally when implementing calibration from the control panel.
Causes: 1 Density sensor shutter not operating smoothly or catching in some position. 2 Harness connection failure of density sensor holder ASSY. 3 Density sensor failure. 4 Transfer HVPS PCB failure. 5 Engine PCB failure.
Remedy: 1 Density sensor shutter not operating smoothly or catching in some position Correct smooth operation of the density sensor shutter. 2 Harness connection failure of density sensor holder ASSY Check the harness connection of the density sensor holder ASSY and reconnect it. 3 Density sensor failure Replace the density sensor holder ASSY. 4 Transfer HVPS PCB failure Replace the transfer HVPS PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9045CDN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie