Code: 492
Description: High voltage power: Image transfer/ paper transfer bias output error
An error signal is detected for 0.2 seconds when charging the separation, image transfer bet or paper transfer roller.
An error signal is detected for 0.2 seconds when charging the separation, image transfer bet or paper transfer roller.
Causes: • High voltage leak • Broken harness • Defective image transfer belt unit or paper transfer unit • Defective high voltage supply unit
Remedy: 1. Input "0V" in the following SP settings: • SP2-326-001 • SP2-326-003 • SP2-407-001 2. Execute the "Process Control" with SP3011-001. 3. Replace the ITB unit if an SC occurs after the Process Control. 4. Replace the PTR unit if an SC does not occur after the Process Control. 5. Replace the HVPS-TTS board.