Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 18 — Brother DCP9055CDN

Code: 18

Description: The paper tray 2 is not installed before printing. (The cassette of the T2 paper edge sensor is open.)
Causes: 1 T2 paper edge actuator catching on some position. 2 Harness connection failure of T2 sensor PCB ASSY. 3 Harness connection failure of T2 Relay PCB ASSY. 4 T2 sensor PCB ASSY failure. 5 T2 Relay PCB failure. 6 Engine PCB failure. 7 Main PCB failure
Remedy: 1 T2 paper edge actuator catching on some position Check the T2 paper edge actuator and reinstall it. 2 Harness connection failure of T2 sensor PCB ASSY Check the harness connection of the T2 sensor PCB ASSY and reconnect it. 3 Harness connection failure of T2 Relay PCB ASSY Check the harness connection of the T2 Relay PCB ASSY and reconnect it. 4 T2 sensor PCB ASSY failure Replace the T2 paper feed frame unit. 5 T2 Relay PCB failure Replace the T2 Relay PCB ASSY. 6 Engine PCB failure Replace the engine PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9055CDN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie