Code: SC724-70
Description: Shift Tray Ascent/Descent Motor Error (Internal finisher) • During ascent from paper surface sensor ON, even after T11 msec elapses, the paper surface sensor does not switch OFF (1st time is jam notification, 2nd time is SC notification). • During descent from paper surface sensor OFF, the paper surface sensor does not switch ON even after T12 msec elapses (1st time is jam notification, 2nd time is SC notification). • During descent to the packing position, the full sensor does not switch ON even if T13 msec elapses.
Causes: • Motor defective • Connector disconnected • Motor overload • Home position sensor error • Paper surface sensor error (*SC724-38, 70 only) • Staple jam (*SC724-86 only)
Remedy: • Reset the connector • Replace the motor • Replace the sensor • Replace the harness • Remove the staple jam (*SC724-86 only)