Description: Fuser unit error. (The center thermistor does not detect 100 °C within the specified time.)
Causes: 1 Fuser unit connector connection failure. 2 Fuser unit failure. 3 Low-voltage power supply PCB failure. 4 Paper eject sensor PCB failure. 5 Main PCB failure
Remedy: 1 Fuser unit connector connection failure Reconnect the connector of the fuser unit. 2 Fuser unit failure Replace the fuser unit. 3 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 4 Paper eject sensor PCB failure Replace the paper eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.