Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 370 — Ricoh Aficio MPC305SPF

Code: 370

Description: ID sensor calibration error
The reflection light output voltage of the ID sensor (Vsg_reg) is not adjusted within the target range. Upper limit: SP3320-013 (default: 4.5 V) Lower limit: SP3320-014 (default: 3.5 V)
Causes: Disconnected ID sensor connectors. Dirty or defective ID sensor. Defective image transfer belt
Remedy: 1. Check the connection of the connectors of the ID sensor. 2. Clean or replace the ID sensor. Note: After replacing the ID sensor, input the ID sensor correction coefficient with SP3331. For details, refer to "ID sensor board" in the Replacement and Adjustment section. 3. Replace the image transfer belt unit.

← Xem tất cả mã lỗi Ricoh Aficio MPC305SPF

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie