Description: Image transfer belt contact motor error ITB contact HP sensor cannot detect the sensor feeler condition within a specified time even when the ITB contact motor rotates. • Contact/Release: 5000 msec • Homing: 10000 msec • Sampling interval: 10 msec
Causes: • Broken harness or defective connectors • Disconnected connector of image transfer belt contact sensor or motor • Defective image transfer belt contact motor • Image transfer belt unit not installed
Remedy: 1. Set the ITB unit firmly. 2. Replace the ITB unit. 3. Clean the ITB contact HP sensor. 4. Check the harnesses. 5. Replace the ITB contact HP sensor. 6. Replace the ITB contact motor.