Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 86 — Brother DCP9270CDN

Code: 86

Description: The paper tray 2 is not installed.
Causes: 1 Harness connection failure of T2 sensor PCB ASSY. 2 Harness connection failure of T2 Relay PCB ASSY. 3 T2 paper edge sensor PCB failure. 4 T2 Relay PCB failure. 5 Engine PCB failure. 6 Main PCB failure.
Remedy: 1 Harness connection failure of T2 sensor PCB ASSY Check the harness connection of the T2 sensor PCB ASSY and reconnect it. 2 Harness connection failure of T2 Relay PCB ASSY Check the harness connection of the T2 Relay PCB ASSY and reconnect it. 3 T2 paper edge sensor PCB failure Check the sensor performance following the procedure described in “Function code 32”. If any problem occurs, replace the T2 paper feed frame unit. 4 T2 Relay PCB failure Replace the T2 Relay PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY. 6 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother DCP9270CDN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie