Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 101-00 — Ricoh Aficio MPC306ZSP

Code: 101-00

Description: LED error The peak white level is less than the prescribed value. This SC is detected when: • The scanner power is on or returning from energy saver mode • ARDF/Book scanning • White plate scan finishes • Shading
Causes: • Condensation in the scanner unit • Connector failure • Defective scanner carriage • BiCU failure • Harness failure • Dirty or defective white plate
Remedy: 1. Check if the SC occurs by turning the power off then on. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 2. Reconnect the following connectors. SBU-BiCU harness (FFC) connector SBU-LEDB harness (FFC) connector (SBU) 3. Check the white plate (Exposure glass). Replace the scanner upper cover if the plate is dirty or damaged. 4. Replace the scanner carriage 5. Replace the BiCU. 6. Replace the harness (FFC).

← Xem tất cả mã lỗi Ricoh Aficio MPC306ZSP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie