Code: 798-4
Description: Stack feed-out motor error
The stack feed-out HP sensor does not detect the home position of the stack feedout belt for a certain time after the stack feed-out belt has moved to its home position. The stack feed-out HP sensor does not turn off for a certain time after the stack feedout belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
The stack feed-out HP sensor does not detect the home position of the stack feedout belt for a certain time after the stack feed-out belt has moved to its home position. The stack feed-out HP sensor does not turn off for a certain time after the stack feedout belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Defective stack feed-out HP sensor • Overload on the stack feed-out motor • Defective stack feed-out motor • Defective main board • Disconnected or defective harness
Remedy: 1. Check or replace the harness. 2. Check for blockages in the stack feed-out mechanism. 3. Replace the stack feed-out HP sensor. 4. Replace the stack feed-out motor. 5. Replace the main board.