Code: 142
Description: White level detection error The white level cannot be adjusted within the target during auto gain control.
Causes: • Dirty exposure glass or optics section • Harness between LED lamp and IDB disconnected • SBU defective • LED lamp defective • IDB defective • IPU defective
Remedy: • Clean the exposure glass, white plate, mirrors, and lens. • Check if the LED lamp is lit during initialization. • Check the harness connections (LED board to IDB, IDB to IPU and SBU to IPU). • Replace the LED board. • Replace the IDB. • Replace the SBU. • Replace the IPU.