Description: @Remote service ID2 mismatch error 1 CTL The ID2 in the individual certificate does not match the ID2 in the NVRAM on the controller board.
Causes: • The controller board in this machine has already been used in a machine in which RC Gate was installed. • The controller board NVRAM in this machine has already been used in a machine in which RC Gate was installed.
Remedy: If an error occurs at installation of the RC Gate: • Check that the individual certificate is correct for the NVRAM in the machine and that the ID2 is correct. • Reinstall the RC Gate after writing the common certificate. If an error occurs after installation of the RC Gate: • Clear the RC Gate data. • Check that the individual certificate is correct for the NVRAM in the machine and that the ID2 is correct. • Reinstall the RC Gate after writing the common certificate.