Description: LED lamp error The peak white level is less or more than 64/255 digits (8 bits) when scanning the shading plate.
Causes: • LED board defective • IDB defective • Harness connection between LED board and IDB disconnected • Standard white plate dirty • Scanner mirror or scanner lens out of position or dirty • SBU, IPU or BCU defective
Remedy: • Check and clean the scanner mirror(s) and scanner lens. • Check and clean the shading plate. • Check the cable connection between the LED board and IDB. • Replace the LED board. • Replace the IDB. • Replace the SBU, IPU or BCU.