Description: Finisher corner stapler motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For internal finisher • The stapler motor does not switch off within the prescribed time after operating. • The HP sensor of the staple unit does not detect the home position after the staple unit moves to its home position. • The HP sensor of the staple unit detects the home position after the staple unit moves from its home position.
Causes: • Staple jam • Motor overload • Defective stapler motor
Remedy: • Check the connections and cables for the components mentioned above. • Replace the HP sensor and/or stapler motor • Replace the finisher main board.