Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 504 — Ricoh Aficio MPC5002

Code: 504

Description: Tray 4 error (Paper Feed Unit or LCT)
This SC is generated if the following condition occurs. For the two-tray paper feed unit When the tray lift motor is turned on, the upper limit is not detected within 15 seconds. For the LCT If the upper or lower limit is not detected within 8 seconds when the tray lift motor is turned on to lift up or lower the tray. This SC is generated too if the following condition occurs 3 consecutive times. For the two-tray paper feed unit When the tray lowers, the tray lift sensor does not go off within 1.5 sec. For the LCT If the upper limit does not go off for 1.5 seconds even the tray lift motor turns on to lower the tray after the upper limit has been detected at power on.
Causes: For the two-tray paper feed unit: • Defective tray lift motor or connector disconnection • Defective lift sensor or connector disconnection For the LCT: • Defective stack transport clutch or connector disconnection • Defective tray motor or connector disconnection • Defective end fence home position sensor or connector disconnection • Defective upper limit sensor or connector disconnection • Defective tray lift motor or connector disconnection
Remedy: 1. Check the cable connections. 2. Check and/or replace the defective component.

← Xem tất cả mã lỗi Ricoh Aficio MPC5002

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie