Code: 724-32
Description: Finisher rear jogger motor error (D585)
The jogger fences of the 500-sheet finisher (D585) move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC code.
The jogger fences of the 500-sheet finisher (D585) move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC code.
Causes: • Jogger HP sensor disconnected, defective • Rear Jogger motor disconnected, defective • Rear Jogger motor overloaded due to obstruction • Finisher main board and rear jogger motor defective
Remedy: 1. Check or replace the harness. 2. Check for blockages in the rear jogger motor mechanism. 3. Replace the jogger HP sensor. 4. Replace the rear jogger motor. 5. Replace the finisher main board.