Code: 542
Description: Heating roller warm-up error 1
• The heating roller temperature does not reach 80°C for 20 seconds after the IH inverter turned on. • The center temperature of the heating roller does not reach the ready temperature for 90 seconds after the IH inverter turned on.
• The heating roller temperature does not reach 80°C for 20 seconds after the IH inverter turned on. • The center temperature of the heating roller does not reach the ready temperature for 90 seconds after the IH inverter turned on.
Causes: • Dirty or defective thermopile • Defective thermistor • Defective heating roller lamp
Remedy: 1. Check if the heating roller thermopile is firmly connected. 2. Replace the thermopile. 3. Replace the IH coil unit.