Code: SC792-17
Description: Spine alignment error
During pin alignment operation, the pin did not reach the up position or return to the home position with the prescribed time (400 ms), and one retry failed within the same time limit.
During pin alignment operation, the pin did not reach the up position or return to the home position with the prescribed time (400 ms), and one retry failed within the same time limit.
Causes: • Alignment pin motor (M602) connector loose, broken, defective • Motor overload • Motor defective • Alignment pin HP sensor (S604) connector loose, broken, defective, or sensor defective • Alignment pin up sensor (S610) connector loose, broken, defective, or sensor defective • Stack not jogged correctly, or not punched correctly