Code: SC381-02
Description: Potential sensor output high error (C). Vd(700) greater than 800[-V] Details: In Vd detection, which is done at the beginning of process control, the measured potential (Vd) is converted to the potential when -700 V is applied to the drum (Vd700) and used to check the potential sensor.
Causes: Potential sensor dirty (foreign object, such as toner, entering the probe window) / potential sensor probe connector disconnected
Remedy: • Check if the potential sensor probe is clean. If it is dirty, blow it with air and then check again. If this does not work, replace the potential sensor. • Potential sensor probe connector is disconnected.