Code: SC514-00
Description: Inverter Junction Gate Motor Error Inverter junction gate home position sensor did not turn on or off within 150msec from the start of home position detection operation (motor drive start). Details: If detected for the first or second time: • During paper transport, this is not handled as a jam/SC; paper is fed normally and the error counter increases. • Otherwise (during initialization), a jam alert is displayed to instruct the user to remove jammed paper, and the error counter increases. If detected for the third time: • Displays the SC No. on the operation panel.
Causes: • Inverter junction gate motor defective/connector disconnected/ harness broken • Inverter junction gate home position sensor defective/connector disconnected/harness broken • Circuit board (PFB, DUB) defective • Junction gate/junction gate drive unit does not move e.g. because physical obstacle (piece of paper, etc.) is blocking operation.
Remedy: • Inverter junction gate motor and inverter junction gate home position sensor check/cleaning/replacement/harness reconnection/ harness replacement • Check or replace the circuit board (PFB, DUB). • Check and/or replace the inverter junction gate and inverter junction gate drive unit.