Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC509-04 — Ricoh Aficio MPC8002SP

Code: SC509-04

Description: Bypass tray Paper Set Error Both the upper limit sensor and the lower limit sensor were on when the machine attempted to adjust the bottom plate position before starting paper feed (at Job-In). If detected for the first to fourth time: User is instructed to set paper again. If detected for the fifth time: SC displayed (only the corresponding tray) The count of detections is reset when successful operation is detected and at power off/on.
Causes: • Bypass tray upper limit sensor defective/disconnected/harness broken • Circuit board (PFB) error • Paper overloaded
Remedy: • Bypass tray upper limit sensor and lower limit sensor check/ cleaning/replacement/harness reconnection/harness replacement • Check or replace the circuit board (PFB). • Check the paper capacity.

← Xem tất cả mã lỗi Ricoh Aficio MPC8002SP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie