Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 795-3 — Ricoh Aficio Pro C900S

Code: 795-3

Description: Slave-to-Cutter Control Board Communication Error PB (D391) Slave-to-Cutter Board Communication Error 1 Slave control board could not communicate with the cutter control board (it detected the communication alarm for over 5 sec.
Causes: • Cutter board connector loose, broken, defective • Cutter control board defective Slave-to-Cutter Board Communication Error 2 Cutter control board could not communicate with the slave control board and detected the communication alarm for over 5 sec. More than twice the maximum allowed alarm recovery time (2 to 3 sec.) • Slave control board connectors loose, broken, defective • Cutter control board connectors loose, broken, defective • Slave control board defective • Cutter control board defective Download Error The version of the firmware on the cutter control board could not be detected at power on. Communication between the slave and cutter control boards is not possible if the cutter board firmware cannot be written to the board. • Cutter control board connection loose, broken, defective • Cutter control board defective
Remedy:

← Xem tất cả mã lỗi Ricoh Aficio Pro C900S

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie