Code: 353
Description: ID sensor, LED current abnormal at initialization
One of the following ID sensor output voltages is detected at ID sensor initialization. • Vsg less than 4.0V when the maximum PWM input (255) was applied to the ID sensor. • Vsg exceeded 4.0V when the minimum PWM input (0) is applied to the ID sensor.
One of the following ID sensor output voltages is detected at ID sensor initialization. • Vsg less than 4.0V when the maximum PWM input (255) was applied to the ID sensor. • Vsg exceeded 4.0V when the minimum PWM input (0) is applied to the ID sensor.
Causes: • ID sensor connector or harness loose, broken, or defective • ID sensor defective • IOB defective • HVPS defective • ID sensor dirty