Code: 390
Description: TD sensor error: Abnormal measurement
The TD sensor output voltage was less than 0.5V, or more than 4.8V 10 consecutive times during copying. -or- The output was less than 2.5V after a new PCDU was installed.
The TD sensor output voltage was less than 0.5V, or more than 4.8V 10 consecutive times during copying. -or- The output was less than 2.5V after a new PCDU was installed.
Causes: • TD sensor connector or harness loose, broken, defective • TD sensor defective • IOB) defective • Toner supply defective (confirm that the toner seal strip has been removed from toner cartridge)