Code: 504
Description: 4th tray lift malfunction (optional paper tray unit)
The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. Note: Normally, if the power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper height sensor should de-activate within 5 seconds after the paper bottom plate starts to drop. If it does not deactivate within 5 s after four attempts, the tray lift motor halts. After two attempts to re-set the paper tray, if this does not solve the problem, then this SC is displayed and tray control halts.
The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. Note: Normally, if the power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper height sensor should de-activate within 5 seconds after the paper bottom plate starts to drop. If it does not deactivate within 5 s after four attempts, the tray lift motor halts. After two attempts to re-set the paper tray, if this does not solve the problem, then this SC is displayed and tray control halts.
Causes: • Lift motor connector or harness loose, broken, defective. • Lift motor defective • Height sensor connector or harness loose, broken, defective • Height sensor defective