Code: 821
Description: Self-Diagnostic Error: ASIC
Causes: [0B00] [B] The write-&-verify check error has occurred in the ASIC. • Defective controller board 1. Replace the controller. ASIC not detected [0B06] [B] The ASIC of the I/O is not detected. • ASIC (controller board defective) • Poor connection between North Bridge and PCI I/F. 1. Replace controller board. SHM register check error [0B10] [B] Failed to initialize or could not read connection bus. Data in SHM register incorrect. • Defective bus connection • Defective SHM 1. Replace controller board Timer error between ASIC and CPU [0D05] [B] The CPU checks if the ASIC timer works properly compared with the CPU timer. • System firmware problem • Defective RAM-DIMM • Defective controller If the ASIC timer does not function in the specified range, this SC code is displayed. • Reinstall the controller system firmware. 1. Replace the RAM-DIMM. 2. Replace the controller board.
Remedy: