Code: 552
Description: Heating roller warm-up error 2
The heating roller temperature does not reach the ready temperature while 70 seconds after the heating lamp on.
The heating roller temperature does not reach the ready temperature while 70 seconds after the heating lamp on.
Causes: • Dirty or defective thermistor (end) • Heating roller fusing lamp broken • Defected thermostat • Defective heating roller fusing lampamp on.
Remedy: 1. Check if the heating roller thermistor (end) is firmly connected. 2. Replace the heating roller thermistor (end). 3. Replace the heating roller fusing lamp.