Code: 687
Description: Memory address command error
The BCU does not receive a memory address command from the controller for the prescribed time after the paper has reached the registration sensor.
The BCU does not receive a memory address command from the controller for the prescribed time after the paper has reached the registration sensor.
Causes: • Harness disconnection at BCU • Controller board loose or broken • Defective HDD • Defective BCU • Defective controller
Remedy: 1. Check if the controller is firmly connected to the BCU. 2. Update the firmware of the controller. 3. Replace the HDD. 4. Update the firmware of the BCU. 5. Replace the BCU. 6. Replace the controller.