Code: 442
Description: ITB contact motor error
The ITB contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
The ITB contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates.
Causes: • Dirty ITB contact sensor • ITB contact motor overload. • Defective ITB contact motor • Disconnected connector of ITB contact sensor or motor • Shorted 24 V fuse on the PSU. • Disconnected cable
Remedy: Check the operation of the ITB unit motor with SP5804-083 or 084. No operation: 1. Check the harness connection of the ITB contact motor. 2. Replace the ITB contact motor. Operation: 1. Check the harness connection of the ITB contact sensor. 2. Replace the ITB contact sensor.