Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 491-01 — Ricoh Aficio SPC730DN

Code: 491-01

Description: Primary/secondary transfer: Output error
The "HVP_ERR2: Output error Sensor signal" is monitored at 20 ms intervals. If 0 (error) is detected ten times in succession (200 ms) (during bias output), the following causes are suspected:
Causes: • Image Transfer Unit error • Transfer Roller error • Damaged HVP connection harness • Noise generated by poor contact of the power supply terminals of the Development Roller
Remedy: • Replace the Image Transfer Unit. • Replace the Transfer Roller • Replace the HVP. • Replace the harness. • Replace the PCDU.

← Xem tất cả mã lỗi Ricoh Aficio SPC730DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie