Code: 508-00
Description: By-pass bottom plate operation error
The signal from the by-pass bottom plate position Sensor has not changed (that is, the signal has not changed from ON to OFF or vice versa) for two seconds or more after the start of reverse Paper Feed Unit rotation, If the error is detected three times in succession, the appropriate SC number is displayed on the operation panel unit.
The signal from the by-pass bottom plate position Sensor has not changed (that is, the signal has not changed from ON to OFF or vice versa) for two seconds or more after the start of reverse Paper Feed Unit rotation, If the error is detected three times in succession, the appropriate SC number is displayed on the operation panel unit.
Causes: - By-pass bottom plate Sensor connector disconnected or other error - By-pass bottom plate Sensor feeler stuck or other error
Remedy: • Turn the power OFF and then ON. • Check and replace the by-pass bottom plate Sensor connector connection. • Replace the by-pass bottom plate Sensor feeler. • Replace the Paper Feed Motor.