Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 210-04 — Ricoh Aficio SPC831DN

Code: 210-04

Description: Laser synchronizing detection error: end position [Y]
The laser synchronizing detection signal for the end position of LDB [K], [C], [M], [Y] is not detected for 200 ms after the LDB unit turned on when detecting the main scan magnification.
Causes: Disconnected or defective I/F harness to laser synchronizing detection unit. Defective laser synchronizing detection board. The laser fails to reach the photo detector. Defective GAVD. Defective LD board or driver. Defective BCU.
Remedy: • Turn the main power switch off and then back on. • Replace the laser optics housing unit. • Replace the harness. • Replace the BCU.

← Xem tất cả mã lỗi Ricoh Aficio SPC831DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie