• Code: 9601
• Display: Wrong Paper Type Reload with A4, Letter, Legal or Folio paper, and press Start.
• Description: The paper feed sensor detected that the paper width was narrower than A4 size.
• Remedy: • Set A4/letter size paper or bigger.
  1 Paper feed actuator L/R coming off Reattach the paper feed actuator L/R. 2 Paper feed sensor failure Replace the paper feed/paper printing position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

• Code: 9608
• Display: Wrong Paper Type Reload with A4, Letter, Legal or Folio paper, and press Start.
• Description: The paper feed sensor detected that the paper length was shorter than the specified size.
• Remedy: • Set A4/letter size paper or bigger.
  1 Paper feed actuator L/R coming off Reattach the paper feed actuator L/R. 2 Paper feed sensor failure Replace the paper feed/paper printing position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

• Code: A200
• Display: Document Jam Clear the scanner jam, then press the Stop Key.
• Description: The document scanning position sensor detected that the document length was 90 cm or more while scanning a document.
• Remedy: • Use A4 size paper or smaller. • Remove the jammed document.
  1 Document scanning position actuator caught in sections of the machine Reattach the document scanning position actuator. 2 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

• Code: A300
• Display: Document Jam Clear the scanner jam, then press the Stop Key.
• Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified distance.
• Remedy: 1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

• Code: A500
• Display: Scan Unable A5 Remove the original document. Turn the power off, then on again
• Description: When scanning the fax, white or black correction data for the CIS was not within the correct range.
• Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A600
• Display: Scan Unable A6 Turn the power off and then back on again.
• Description: Although operation was retried due to error A500 that occurred while scanning the fax, white or black correction data for the CIS was not within the correct range.
• Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A700
• Display: Print Unable A7 Turn the power off and then back on again.
• Description: Color parameter in the ROM does not match the CIS.
• Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A800
• Display: Print Unable A8 See Troubleshooting and routine maintenance chapter in User's Guide.
• Description: An error was detected in the color parameter in the ROM during scanned image processing.
• Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.