Description: The number of rotations of the drum unit has reached the life limit. (Printing does not stop.)
Remedy: 1 Replace the drum unit with a new one and reset the drum counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
Description: Dot counter or developer roller counter of the toner is reaching the upper limit (when setting toner stop mode).
Remedy: 1 Connection failure of the new toner sensor PCB harness Reconnect the new toner sensor PCB harness. 2 Connection failure of the motor encoder PCB flat cable Reconnect the motor encoder PCB flat cable. 3 New toner sensor PCB failure Replace the new toner sensor PCB ASSY. 4 Motor encoder PCB failure Replace the motor encoder PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
Display: Replace Toner Open the Scanner Cover and Top Cover, replace Toner Cartridge.
Description: Dot counter or developer roller counter of the toner has reached the upper limit (when setting toner stop mode).
Remedy: 1 Replace the toner cartridge with a new one and reset the toner counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
Display: Replace Toner Received faxes are also stored in memory until the toner cartridge is replaced or the memory is full.
Description: Dot counter or developer roller counter of the toner is reaching the upper limit (when setting continue mode).
Remedy: 1 Replace the toner cartridge with a new one and reset the toner counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
Display: Toner Ended Open the Scanner Cover and Top Cover, replace Toner Cartridge.
Description: Dot counter or developer roller counter of the toner has reached the upper limit (when setting continue mode).
Remedy: 1 Replace the toner cartridge with a new one and reset the toner counter. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
Display: Cartridge Error Put the Toner Cartridge back in
Description: New toner sensor in the toner cartridge could not detect the new toner cartridge correctly.
Remedy: • Reset the toner manually under the guidance of service personnel. 1 Replace the toner cartridge with a new one and reset the toner counter manually. If the error display is not cleared, the main PCB is faulty. Replace the main PCB ASSY.
Description: The eject sensor detected that the top cover was open.
Remedy: • Close the top cover. 1 Eject actuator caught in sections of the machine Reattach the eject actuator. 2 The rib inside the top cover (which presses the eject actuator) is broken Replace the top cover ASSY. 3 Eject sensor failure Replace the eject sensor PCB ASSY. 4 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.
Description: Detected that the top cover was open by BD error.
Remedy: • Close the top cover. 1 Connection failure of the laser unit flat cable Reconnect the laser unit flat cable. 2 The rib inside the top cover (which presses the laser shutter arm) is broken Replace the top cover ASSY. 3 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 4 Faulty laser shutter arm of the laser unit Replace the laser unit. 5 Main PCB failure Replace the main PCB ASSY.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.