Remedy: CIS flat cable broken or not connected properly - Correct the cable connection. - Replace the scanner cover (scanner unit). CIS motor harness not connected properly Correct the harness connection. CIS motor defective Replace the scanner cover CIS drive unit defective (scanner unit). CIS defective Main PCB defective Replace the main PCB.
Description: No recording paper fed. (No paper detected by the registration sensor.)
Causes:
Remedy: Paper tray not set in place Set the paper tray correctly. Recording paper not loaded correctly No paper loaded in the paper tray. Reload paper. Load the correct size of paper. Jam clear cover not closed correctly Close the jam clear cover correctly. Registration sensor harness connection failure Reconnect the harness. Registration sensor defective Replace the registration sensor PCB. Main PCB defective Replace the main PCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.